Most manual folding wheelchairs can accommodate the Scalamobil. 

A simple bracket installation is all that is required!   Wheelchairs must

meet the following criteria: (or a simple call to us will confirm we can fit brackets

to your wheelchair).

1.  Seat width of wheelchair must be a minimum of 16" wide.

2.  Wheelchair must have a collapsible frame.

3.  Rear wheels should be quick release style.  If not already fitted these are

.    available for most wheelchairs.

4.  Area under seat must be free of devices such as ventilations, oxygen tanks, etc

If you wheelchair does not meet these requirements, please go to the 

Scalachair X3 or the Scalaport X6 for information on alternative ways to use the

Scalamobil.

Using the Scalamobil is fast and easy!

1.  Roll the Scalamobil under the wheelchair seat and fasten to the brackets using the quick  

     release pins.

2.  Using the Scalamobil, slightly lift the wheelchair up and remove the rear wheels.

3.  Position the wheelchair at the steps and you are ready to climb!

After replacing the rear wheels, the wheelchair can still be pushed with the Scalamobil attached.