Dumper Jet 700

Electric wheelbarrow designed to work with loads up to 400kg.

The Dumper Jet 700 is designed to work with loads up to 400kg

Electric wheelbarrow designed to work with loads up to 400Kg. The strong frame made of steel and powder coated with exterior paint. The right balance between the load and the wheels, coming from a careful study, gives the user confidence, increasing the handiness in the manoeuvre operations. The semi automatic tilting of the skip is helped by an electronic system that controls the forwarding or the backing speed guided by a knob accelerator, making the discharge secure and practical even in closed environments respecting the anti pollution normative for the noise and exhaust fumes emission. The Dumper Jet is supplied with on/off keys, and an extra red lever for safety which allows to work only in the presence of assigned personnel.

It is equipped with an emergency stop, led to verify the charging level, low level battery acoustic detector, and an external plug for a fast and easy connection to the charger. The 800W motor has an electromagnetic brake that block off the Dumper Jet preventing accidental slippery while on ramps up to 30% at full load. The gears in oil bath avoid any kind of maintenance and the machine can be cleaned easily without causing short circuits thanks to the controller and the well cabled wires kept in an hermetic ambient. The tilting system of the Dumper gives the possibility to equip and change rapidly different types of accessories depending on the expected use.

Specifications Dumper Jet 700
Capacity - flat surface (kg) 400
Capacity on 30% slope (kg) 300
Overall Length (mm) 1330
Width between wheels (mm) 785
Overall Height (mm) 460
Tilting device semi-automatic
Weight (kg) 136
Engine (Watt/Volt) 800/24
Drive Diff. in oil bath
Forward Speed (km/h) Max 5
Reverse Speed (km/h) Max 2
Battery Charger 16 A high frequency
Control Panel Analog
Batteries (A/V) 80/12

« Download PDF click here »