Push the load
forks under the pallet, press the lifting button to lift the
load slightly, move it to the rear of the vehicle with the
Self-Loader.
2.
Using the lifting button, lift the load a little over the
vehicle floor level.
3.
Push the load
into the vehicle and lower the load onto the vehicle floor.
Continue the operation so that the Self-Loader climbs up off
the ground.
4.
Pull the stabiliser legs out.
5.
Continue the operation until the Self-Loader is at the end
of its vertical travel. Push the stabiliser legs under the
load.
6.
Lift the load as described in phase 2. Push the load and the
Self-Loader into the vehicle. When the vehicle arrives at
its destination, the Self-Loader is also available for the
removal etc.
7.
If you need to
add subsequent loads into the same vehicle, push the first
load further into the vehicle with the Self-Loader so there
is enough space for the additional loads. We can custom
build pallets for your vehicle for a few dollars each.
